USE:

For sucking in very dusty air containing various types of materials in suspension. The main feature of thesetypes of fans is the association of high output (deriving from the use of a rotor with reversed blades, special profile), with the suction of dusty fluids or those containing granular materials.Besides these fans are characterized by a very flat curve of the absorbed power, in order not to overload themotor neither when working with open inlets. They are assmbled in joineries for transporting saw dust andwooden shavigs, excluding filamentaus material, in mechanical industries for sucking in metal chips,in pneumatic transport of the cement factories, ceramic factories, mills, fodder factories, tanneries, founderies,in textil and chemical Industries and in general in all those applications where it is necessary to transportharmful air with low and medium pressure.The temperature of the fliud sucked in must not excced 80°C. For higher temperatures it is necessary to make some changes on the construction of the fan.

2 Poles

4 Poles

2 Poles

4 Poles

CTF-CTG Models

USE:

For the aspiration of very dusty air containing various types of materials.The level of use this series of ventilators is extremely high in the following industries SAWMILLS/JOINERIES: for the transportation of sawdust and of wood chips;TANNERIES: for the transportation of leather trimmings and shavings; BOOKBINDERIES: for the transportation of paper trammings; TEXTILE INDUSTRIES: for the transportation of yarn waste and of long fibres; INDUSTRIES FOR THE WORKING OF PLASTICS: for the transportation of granulates and of nylon trimmings;for the loading of solid combustibles into boilers, etc.

N.B.: These ventilators may also be used as paper shredders of high reliability, by applying a particular adapterto the fan wheel witnout influencing the air characteristics.Our technical office is always at your disposition.

CTG